Designed for What the Water Is For

How clean the water has to be depends on what it is for. Drinking water, dialysis water for a hospital and water for pharmaceutical production each have their own requirements. So we design from four things: the use, the quality that use requires, the contamination in the source water and the client’s own requirements, such as the quantity needed. Some treatment principles are common to every plant, but we set the treatment itself case by case, against the quality agreed with the client.

Treating the Water for the Whole Building

Water from a well, bore well or river can carry contaminants, and every source is different. Some show as colour, taste or odour; bacteria, viruses and many chemicals show only in a laboratory analysis.

A purifier serves one tap, while the rest of the water goes to bathing and washing and can damage sanitary fittings. A central plant treats the water before the overhead tank, so every tap gets treated water.

How a Water Treatment Plant Project Runs

  1. Analyse the source water. Green Earth, the Group’s laboratory, can carry out the analysis.
  2. Agree the target. What the water is for, the quality it must reach and how much you need.
  3. Choose the treatment. The options include sand, iron removal or carbon filters, softening, ultra filtration (UF) or reverse osmosis (RO), clarification, chlorine, UV or ozone disinfection, and pH correction.
  4. Build and commission. Design, supply, erection, fine-tuning, operator training and handover.
  5. Maintain. The first year’s annual maintenance contract (AMC) and the trial-run consumables are included. After that we offer AMCs, spares and consumables.

Examples of Uses We Design For

A plant can be designed for any use of water. The common ones:

  • Drinking water: for houses, apartments, hotels, resorts, commercial buildings, malls, institutions and hostels.
  • Hospitals: drinking water and dialysis water.
  • Industry: pharmaceutical water, and water for fish, meat, bakery, beverages, food outlets and bottled water.
  • Recreation: swimming pools and water theme parks.

Project Examples

Besides the plant in Goa, our WTP clients include Amana Toyota, at dealership sites across north Kerala, and the Kerala Land Reforms and Development Co-operative Society (LADDER).

Our project photographs include a 65,000 LPH pressure sand filter in Goa, three-stage filtration for a small apartment building, two-stage filtration for a house, domestic settling tanks and a small ozone unit. Our ISO 9001:2015 scope also covers recycling and zero liquid discharge.

Examples of Our Water Treatment Plants

See All Projects

Common Questions

What Do You Need from Us to Design a Water Treatment Plant?

A laboratory analysis of your source water, and what the treated water is for. If you have no report, Green Earth, the Group’s laboratory approved by the Kerala State Pollution Control Board, can carry out the analysis.

Can the Plant Be Designed Around Our Requirements?

Yes. Tell us what the water is for and how much you need. We set the treatment from that and from the analysis of your source water, so a plant for drinking water differs from one for dialysis or pharmaceutical water.

Who Maintains the Plant After It Is Commissioned?

We do. The first year’s AMC is included. After that we offer AMCs, maintenance support and consumables, and Futuristic Environ, the Group’s sales unit, supplies spares.

Why a Central Plant Instead of a Purifier?

A purifier treats the water at one tap. Untreated water still reaches the bathrooms and washing points, where it can damage sanitary fittings. A central plant treats all the water before it reaches the overhead tank.

Enquiries

Tell us the type of plant, where it is and what you need.